Selling Price -
$142,900.00
- BASE UNIT
- AUTOMATIC LUBRICATION SYSTEM
- EMERGENCY STEERING
- HYDRAULIC REVERSIBLE FAN
- BELLY GUARD FULL FENDERS
- STEEL BELTED 23.5 BY R25 L3 TUBELESS RADIALS
- AIR SUSPENSION SEAT WITH 3-INCH SEAT BELT
- BACK UP ALARM AND ROTATING BEACON
- ELECTRIC RAISE ON ENGINE HOOD
- REARVIEW CAMERA
- AM/FM RADIO
- 225 HP CUMMINS QSB6.7 DIESEL TIER 4 FINAL
- TIRE CHOCKS
- AIR FILTER ALARM
- 3 YEAR TELEMATICS SUBSCRIPTION HARDWARE INCLUDED
- OPERATION MANUAL PARTS BOOK AND ONE KEY
- ROPS/FOPS DELUXE CAB WITH AC AND HEATER
- Z BAR TYPE FRONT END LINKAGE
- 108 INCH WIDE 4.31 CU. YD. G.P. BUCKET W/BO EDGE
- ZF 4WG200 TRANSMISSION AND ZF LIMITED SLIP AXLES
- SINGLE JOYSTICK PILOT CONTROLS FOR LOADER OPERATI
- AUTO BOOM HEIGH KICK-OUT CIRCUIT AND RETURN TO DIG
- RIDE CONTROL
- 1820 PALLET FORK (QC)
- 2022
- LiuGong
- Medium Wheel Loaders
- 856H
- Medium
- Model: QSB6.7
- Regulation: Tier 4 Final / Stage IV
- Cummins
- Max gross: 225 hp (168 kW) @ 2,100 rpm | Max net: 215 hp (160 kW) @ 2,100 rpm
- Peak: 1,106 lb-ft (1,500 N-m) @ 1,400 rpm
- 409 in3 (6.7 L)
- 6
- Turbocharged & air-to-air intercooled
- Type: Countershaft, power shift | Torque converter: Single-stage, three-element | Maximum travel speed, fwd: 23.7 mph (38.1 km/h) | Maximum travel speed, rev: 14.9 mph (23.9 km/h) | Number of speeds, fwd: 4 | Number of speeds, rev: 3
- Limited slip
- Limited slip
- Configuration: Articulated
- Type: Wet discs, two independent circuits | Actuation: Hydraulic
- Type: Manual electronic control | Actuation: Hydraulic
- Width over tires: 9 ft 0 in (2,750 mm) | 23.5R25 L3 tire
- Width over tires: 9 ft 0 in (2,750 mm) | 23.5R25 L3 tire
- Bucket breakout force: 40,275 lbf (179 kN)
- Steering pressure: 2,756 psi (19 MPa) | System pressure: 3,191 psi (22 MPa)
- Piston
- Raise: 5.7 s | Dump time: 1.3 s | Float down time: 3.0 s | Total cycle time: 10.0 s
- Axle oscillation: ±12° | Bucket rollback at ground level: 43° | Bucket rollback at carry: 48° | Turn angle, either side: 38° | Rear angle of departure: 27°
- Maximum hinge pin height: 13 ft 2 in (4,028 mm) | Dump clearance at full height discharge: 9 ft 8 in (2,948 mm) | Dump reach at full height discharge: 3 ft 8 in (1,129 mm) | Bucket rollback at maximum height: 58° | Maximum dump angle at full height: 45° | Cab height: 11 ft 3 in (3,450 mm)
- Maximum digging depth, bucket level: 3 in (85 mm)
- 17 in (431 mm)
- 10 ft 10 in (3,320 mm)
- Wheel tread: 7 ft 0 in (2,150 mm)
- With bucket down: 27 ft 3 in (8,318 mm)
- bucket carry: 22 ft 9 in (6,954 mm)
- of tire: 20 in 4 in (6,205 mm)
- over bucket: 9 ft 10 in (2,976 mm)
- Bucket capacity: 4.2 yd3 (3.2 m3 )
- Tipping load - straight: 28,219 lb (12,700 kg) | Tipping load - full turn: 24,250 lb (11,000 kg)
- Tank: 79.2 (300 L) | Transmission: 11.8 gal (45 L) | DEF tank: 5.0 gal (19 L)
- 4.7 gal (18 L)
- 11.6 gal (44 L)
- 62.3 gal (236 L)
- Axles, each: 11.6 gal (44 L)
- Axles, each: 11.6 gal (44 L)
- Operating: 42,540 lb (19,296 kg)
- CLG856HZVNL701565
- $142,900.00
- Arlington Heights
- New
- 0101E000692
- 2022
- LiuGong
- Medium Wheel Loaders 856H
- CLG856HZVNL701565
- Model: QSB6.7
- 4955
- Type: Countershaft, power shift | Torque converter: Single-stage, three-element | Maximum travel speed, fwd: 23.7 mph (38.1 km/h) | Maximum travel speed, rev: 14.9 mph (23.9 km/h) | Number of speeds, fwd: 4 | Number of speeds, rev: 3
- Available
- over bucket: 9 ft 10 in (2,976 mm)
- Maximum hinge pin height: 13 ft 2 in (4,028 mm) | Dump clearance at full height discharge: 9 ft 8 in (2,948 mm) | Dump reach at full height discharge: 3 ft 8 in (1,129 mm) | Bucket rollback at maximum height: 58° | Maximum dump angle at full height: 45° | Cab height: 11 ft 3 in (3,450 mm)
- CLG856HZVNL701565