Information
- MTU 10V 1600 TIER 4F ENGINE
- CAMERA MONITOR
- MILL DRUM 2200 1020 15 - W DIA LINE SPACING (MM)
- MILLING DRUM SW 2200 - DRUM QUICK CHANGE
- STORAGE CUTTER CHANGE
- HOSE REEL - AUTO - LOW PRESSURE WASHDOWN SYSTEM
- MILLING DRUM SCANNING - CONTACT SKI
- BALLAST 1 - REAR FRAME - 2 125 LBS.
- DUST COLLECTION SYSTEM
- BALLAST 2 - ON MILLING BOX - 1 830 LBS.
- AUXILIARY DRIVE
- PNEUMATIC TOOL TEETH - AIR COMPRESSOR AND AUX ENG
- 317 GALLON FUEL TANK
- SUPP CONTROL BLOCK MODULE
- 1 057 GALLON WATER TANK
Photos
Highlights
- $272,000.00
- Arlington Heights
- Pre-Owned
- 0101E000200
- 2019
- Bomag
- Cold Milling Machines BM 2200/75
- 101888011015
- 10V 1600
- 28 V
- 1079
- Diesel
- Available
- Crawler: 230 in | Conveyor inside / outside: 35.4 in | Milling: 78.7 in
- Crawler: 488 in | Discharge: 196.9 in
Specifications
- 2019
- Bomag
- Cold Milling Machines
- BM 2200/75
- General
- 10V 1600
- MTU
- 771 hp / 567 kW | Idle at rated: 2,100 rpm
- 3,340 Nm / @1,300 rpm
- 2.200 rpm
- EU Stage IV / US Tier 4 final
- 10
- 1.068 cm3
- Liquid cooled
- 2 x 12 V / 2 x 12 Ah
- 28 V
- 0 – 229 fpm | Transport: 0 – 4,7 mph
- Milling Drum Speed: variable, 100, 112, 131 ¹/min | Fuel consumption: 195g/k / 205 kWh
- Milling line space: 0.6 in | Cutting diameter: 40.2 in
- Crawler: 1,212 in
- Crawler: 230 in | Conveyor inside / outside: 35.4 in | Milling: 78.7 in
- Crawler: 488 in | Discharge: 196.9 in
- Milling: 0 – 13.8 in
- 317 gal
- 1,057 gal.
- 106 gal.
- Number of tools: 174
- With Milling Compartment: 65,918 lbs | Without Milling Compartment: 50,816
- With CE: 76,831 lbs
