Back

2019 Bomag Cold Milling Machines BM 2200/75

MoreLess
Limited Time Offer!

Selling Price -$272,000.00

No Images Available

Selling Price -

$272,000.00

HD Certified Pre-Owned
  • MTU 10V 1600 TIER 4F ENGINE
  • CAMERA MONITOR
  • MILL DRUM 2200 1020 15 - W DIA LINE SPACING (MM)
  • MILLING DRUM SW 2200 - DRUM QUICK CHANGE
  • STORAGE CUTTER CHANGE
  • HOSE REEL - AUTO - LOW PRESSURE WASHDOWN SYSTEM
  • MILLING DRUM SCANNING - CONTACT SKI
  • BALLAST 1 - REAR FRAME - 2 125 LBS.
  • DUST COLLECTION SYSTEM
  • BALLAST 2 - ON MILLING BOX - 1 830 LBS.
  • AUXILIARY DRIVE
  • PNEUMATIC TOOL TEETH - AIR COMPRESSOR AND AUX ENG
  • 317 GALLON FUEL TANK
  • SUPP CONTROL BLOCK MODULE
  • 1 057 GALLON WATER TANK
  • 2019
  • Bomag
  • Cold Milling Machines
  • BM 2200/75
  • General
  • 10V 1600
  • MTU
  • 771 hp / 567 kW | Idle at rated: 2,100 rpm
  • 3,340 Nm / @1,300 rpm
  • 2.200 rpm
  • EU Stage IV / US Tier 4 final
  • 10
  • 1.068 cm3
  • Liquid cooled
  • 2 x 12 V / 2 x 12 Ah
  • 28 V
  • 0 – 229 fpm | Transport: 0 – 4,7 mph
  • Milling Drum Speed: variable, 100, 112, 131 ¹/min | Fuel consumption: 195g/k / 205 kWh
  • Milling line space: 0.6 in | Cutting diameter: 40.2 in
  • Crawler: 1,212 in
  • Crawler: 230 in | Conveyor inside / outside: 35.4 in | Milling: 78.7 in
  • Crawler: 488 in | Discharge: 196.9 in
  • Milling: 0 – 13.8 in
  • 317 gal
  • 1,057 gal.
  • 106 gal.
  • Number of tools: 174
  • With Milling Compartment: 65,918 lbs | Without Milling Compartment: 50,816
  • With CE: 76,831 lbs
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $272,000.00
  • Lemont
  • Pre-Owned
  • 0101E000200
  • 2019
  • Bomag
  • Cold Milling Machines BM 2200/75
  • 101888011015
  • 10V 1600
  • 28 V
  • 1041
  • Diesel
  • Available
  • Crawler: 230 in | Conveyor inside / outside: 35.4 in | Milling: 78.7 in
  • Crawler: 488 in | Discharge: 196.9 in

Recommendations

Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.